Friday, February 10, 2023

A long overdue update on our Bugeye Sprite

It's been a while since I last posted so I thought I would bring you up to date with our Bugeye Sprite project!

The car is now painted and has been wet sanded with 1000 and 2000 grit sandpaper. Next up is polishing and after that installing things like badges, lights, doors etc. The engine, gearbox, rear end and all the suspension are in place. If all goes well it will be on the road this spring!

 

Before paint

 
After paint

There were a couple of mishaps along the way, though. While upgrading the lighting in the garage I dropped an electrical box on the front of the car resulting in a fairly deep chip in the new paint. That took a while to fix but we are now back on track.

Engine bay before

Engine bay after

You can see the progress and processes on the Econobox Garage YouTube channel by following this link. 

Thanks for checking in! I'd love to hear from you so please leave a comment below.

2 comments:

  1. Ian, I am wiring the dash on my 59 bugeye and not clear on wiring wiper switch. I have the black with green tracer on one side and put a ground wire on the other side, which I believe is correct, however in your video it looks like you have 3 black wires on one side of the switch. I do have 3 black wires coming from harness that I am not sure where they go (only ones left for dash). are you using the switch as a coupling point for grounds? I don't have an original reference because the car was in a fire. My name is Al and my email is jgmk09@aol.com. any help would be appreciated.

    ReplyDelete
    Replies
    1. You are correct, the three black wires go to the wiper switch.

      Here's a video on how I wired up my dash: https://youtu.be/ROYxNV07WLA?si=NPRWBP-925tnQOXl

      Hope that helps!

      Ian

      Delete